Timed Reminder (Wake-Up)

| | | | | |

Тел. : (495) 730-4022 |

Timed Reminder (Wake-Up)

Functional description
This function informs the time to the subscriber automatically when it arrives by sending the ring signal, if the general subscriber sets the specific time using his/her own terminal.
Operating procedure
Registering a wake-up bell using the general telephone

The general subscriber lifts up the handset and hears the dial tone.
Dials a wake-up bell registration code (Default:*3).
Dials the time number (two digits).
Dials the minute number (two digits).

5 Dials the wake up type (one digit: 0 = today, 1 = tomorrow, 2 = everyday).

6 The general subscriber hears the Service Set Tone.

Canceling a wake-up call using the general telephone

The general subscriber lifts up the handset and hears the dial tone.
Dials a wake-up cancellation code (Default:#3).
The general subscriber hears the Service Set Tone.

Registering a wake-up bell using the D-Tel

When a wake-up bell registration code (Default:*3) is dialed, the current registration information will be displayed.

HH:MM:T (0/1/2)

ENTER YOUR WAKE UP TIME

2 Dials the time number (two digits).
Dials the minute number (two digits).
Dials the wake up type (one digit: 0 = today, 1 = tomorrow, 2 = everyday).

5 Press the “HOLD/SAVE” button.

6 The general subscriber hears the Service Set Tone.

Canceling a wake-up bell using the D-Tel

The general subscriber lifts up the handset and hears the dial tone.
Dials a wake-up cancellation code (Default: #).

3 The general subscriber hears the Service Set Tone. At this time, erase status will be displayed as follows.

ERASED WAKE UP TIME

HH:MM

HH:MM ç Time:Minute when registration is erased.

Retrieving wake-up bell registration information at the attendant

Press the “WAKE UP” button.
Dials the extension number to retrieve wake-up bell registration information.
Wake-up bell registration information will be displayed on the LCD screen.

Registering wake-up bell registration information at the attendant

Individual registration

1) Press the “WAKE UP” button.

2) Dials the extension number to retrieve wake-up bell registration information.

3) Dials the time number (two digits).

4) Dials the minute number (two digits).

5) Dials the wake up type.

6) Press the “ENT”(Registration) button.

2 Batch registration

1) Press the “WAKE UP” button.

2) Dials the first extension number to retrieve wake-up bell registration information.

3) Dials the time number (two digits).

4) Dials the minute number (two digits).

5) Dials the wake up type.

6) Dials the “*” key.

7) The last extension number to register the wake-up.

Canceling a wake-up bell at the attendant

Press the “WAKE UP” button.
Dials the first extension number to retrieve wake-up bell registration information.
Press the “FORC RLS”(Forced Release) BTN.

Service conditions
Even though the type of wake-up bell is selected as “tomorrow”, it will be registered as “today” if the registered time is less than or equal to the current time.

The subscriber can set the time interval of wake-up bell ringing. (When the bell will ring again.)

Device can be selected that will be used to report the registration or cancellation statue when it normally carried out using the general telephone/D-Tel.

The wake-up bell rings as many times as predetermined times until it is answered.

Times of wake-up bell ringing can be set.

When the subscriber answers to the wake-up bell call, wake-up registration information will be automatically cleared.

When registration or cancellation using the ATD is normally carried out, its result will be reported to the PMS.

Data generation
Defining a device that will report the result when the wake-up call is not answered. (0 = No Service/1 = ATD)

Defining a device that will report the result when the receiver of a wake-up call is busy. (0 = No Service/1 = ATD)

[10.4 Wakeup Service ⇒ Output Device in Line Busy]

Defining a device that will report the result when wake-up bell registration or cancellation is normally carried out. (0 = No Service/1 = ATD)

[10.4 Wakeup Service ⇒ Output Device in Reg./Answer]

Maximum number of times to make a wake-up call to the terminal that registered the wake-up bell.

[10.4 Wakeup Service ⇒ No Answer Re-ring Counter]

Time interval (unit: minute) that the wake-up ring is generated again after sending a wake-up call for the first time.

[10.4 Wakeup Service ⇒ Re-ring Time Interval]