System Call Park

| | | | | |

Тел. : (495) 730-4022 |

System Call Park

Functional description
This function enables the subscriber in busy to be parked in the system and let him to resume a call with the intended subscriber later.
Operating procedure
Registering a system call park using the general telephone

Press the “Hook-Flash” in the busy state.
Press the registration code for a system call park (Default:#7).
The subscriber registering the system call park can hear confirmation sound when if it is successful.
The subscriber registering the system call park will hear hold sound.

Registering a system call park using the D-Tel

Press the “TRANS”(Transfer) button in the busy state.
Press the registration code for a system call park (Default:#7).
The subscriber registering the system call park can hear confirmation sound when if it is successful, and the following message will be displayed on the LCD screen.

LINE HOLDING

LINE 10101 09:00 am

4 When function is successfully registered, the subscriber being in a system call park will hear hold sound.

Responding to the system call park using the general telephone

Off-hook first.
Press the response code for a system call park (Default:#7).
Press the extension number of the subscriber who is put on the system call park.
A call is connected to the subscriber being in a system call park.

Responding to the system call park using the D-Tel

Press the response code for a system call park (Default:#7).
Press the extension number of the subscriber who is put on the system call park.
A call is connected to the subscriber being in a system call park.

Service conditions
Only up to 64 subscribers can use this function in the system.

The ATD cannot be put on the System Call Park.

When the subscriber in the System Call Park mode release, the System Call Park will be cancelled.

If the subscriber who requested a system call park does not call again the subscriber being in the system call park, the call will be directed to the subscriber who requested a system call park. In this case, the subscriber who requested the System Call Park should be in the idle state. It not in the idle state, the System Call Park mode will be sustained.

Data generation
Confirmation Sound change

[2.4 System Tone Parameter – EXT Camp On Holding Tone]