Consultation Transfer to Conference

| | | | | |

Тел. : (495) 730-4022 |

Consultation Transfer to Conference
Functional description
This function allows an extension subscriber to hold a subscriber on line, and call other subscriber for consultation transfer, and performs three ways conference call.
Operating procedure
Consultation Transfer to Conference Call from general telephone/D-Tel telephone.

Extension subscriber (A) is on line with other extension subscriber or trunk subscriber (B).
Subscriber (A) presses Hook Flash for transfer.
Subscriber (B) becomes held and hears holding tone, and subscriber (A) hears 2^nd dial tone.
Subscriber (A) dials the number of subscriber (C).

5 Subscriber (A) receives ringing tone, and subscriber (C) receives ring current.

6 Subscriber (C) picks up the handset.

7 Subscriber (A) and subscriber (C) determine whether to perform conference call from consultation call.

8 Subscriber (A) presses “Hook Flash” or “TRANS”(Transfer) button two times.

9 Three ways conference call is performed between subscriber (A), subscriber (B), and subscriber (C).

Service conditions
If subscriber (A) refuses to enter into conference call and hangs up the handset, general call transfer service is performed.

Consultation transfer function key when there is not idle conference call port generates blocking tone.

If the subscriber on consultation call presses “Hook Flash” and “TRANS”(Transfer) button once, Broker Call is performed in which the call is made with the subscriber on hold and the subscriber on line becomes held. Conference call is performed with two pressings on “Hook Flash” or “TRANS”(Transfer) button.

Data generation
Press 2 times hook flash in predefined time for conference service (only SLT)

[2.3 System Lock Parameter ⇒ Second Hookflash Wait Lock]

Interactions