Auto Group Hunting

| | | | | |

Тел. : (495) 730-4022 |

Auto Group Hunting
Functional description
If a called subscriber’s line is busy, the call is forwarded to one of the subscribers in the same hunting group that the called subscriber belongs to.
Operating procedure

Auto Group Hunting

1 Internal subscriber A subscriber calls an internal subscriber.
2 If the called subscriber’s line is busy, the ring is sent to an idle subscriber of the subscribers in the same hunting group that the called subscriber belongs to.
3 A call between the two subscriber is set up once the subscriber answers the ring. Service conditions

This function is available to both general telephone and D-Tel.

This function is unavailable while step call is active.

The called original subscriber should set up the function so that auto group hunting may be performed in the subscriber’s hunting group.

In order for the function to be performed, there should exist at fewest an idle subscriber in the same hunting group.

Data generation

Assign of Auto Group Hunting

[6.7 Hunting Group ? Auto Group Hunting]

Assign whether step call is used or not.

[2.6 System Feature Option ? Step call use]